How to improve the production capacity of square swing screen

The methods for improving production capacity of square swing screens can be summarized as follows:

1、 Optimize feeding mode:

Ensure uniform feeding and avoid uneven distribution of materials on the sieve surface. Uniformity can be maintained by setting a distributor at the feeding port or by manually feeding.

Control the feeding amount. Excessive feeding can cause the screening material to be too thick, resulting in excessive output, clogging the screening mesh, and ultimately reducing production.

2、 Install and debug the cleaning device:

Set up an automatic screening device to reduce the possibility of screen clogging and improve screening efficiency.

Cleaning the sieve holes to ensure that the smoothness rate of the sieve remains above 80%, which helps the material pass through the sieve holes and improves the screening efficiency.

3、 Improve the opening rate of sieve holes:

For cases with large sieve holes, using metal woven mesh or large hole punching plates to increase the opening rate of sieve holes can improve the screening effect and increase the yield of sieve holes.

However, it should be noted that increasing the opening rate of the sieve may affect the screening accuracy, so a balance needs to be made based on actual needs.

4、 Adjusting the tilt angle:

According to the characteristics of the materials and screening requirements, adjust the tilt angle of the screen box appropriately to optimize the movement of the materials on the screen surface and improve screening efficiency.

For example, when there are fewer impurities in the material, the tilt angle can be appropriately increased to accelerate the movement of the material on the sieve surface and improve the yield.

5、 Equipment maintenance and replacement:

Regularly check the wear of the sieve and replace severely worn ones in a timely manner to maintain the screening effect.

Check if the cleaning rubber ball is worn, and replace it if necessary to maintain sufficient self-cleaning ability on the screen surface.

6、 Adjust the screen position and discharge port:

Adjust the position of the sieve and the height of the discharge port according to the screening materials and requirements, so that the machine can achieve the best screening effect.

7、 Ensure stable operation of equipment:

Ensure that the supporting spring is uniformly stressed and the vibrating screen is evenly supplied.

Adjust the tilt angle to the optimal 4-5 ° to ensure optimal screening efficiency is achieved.

8、 Model selection:

Fully understand the required screening materials and production requirements, select the correct model to ensure that the equipment can meet production needs.

By comprehensively applying the above methods, the production capacity of square swing screens can be effectively improved while maintaining high screening accuracy and efficiency. It should be noted that different materials and screening requirements may require different adjustment and optimization methods, so flexible adjustments need to be made according to specific situations in practical applications.